Downloads

Key requirements

Floor and roof drains are plumbing fixtures.They must be trapped, vented and tied to the building sanitary system or storm water drainage system according to AS 3500.

ACO Wexel comprises stainless steel floor grates, available both with and without cast iron bodies, for either a push-fit or a deep body connection.

The cast iron bodies are available in a number of options:

• Adjustable height tops to suit the finished floor level
• Clamp rings and puddle flanges to accommodate the waterproof membrane
• Bucket traps and other variants

The assembly of pipe joints is quick and easy for these units. The outlet is sealed against the inside of the pipe.

1. Make sure that correct O-ring seal is fitted in place on push-in body to suit either PVC or HDPE pipe.
   - Red O-rings supplied are for HDPE pipe.
   - Black O-rings supplied are for PVC pipe.
2. Make sure the cut end of the pipe is clean and free of burrs and rough edges- this will make fitment easier and eliminate damage to seals during fitment.
3. Apply a light application of lubricant to the seal and the pipe end, making sure mating ends of pipes and fittings are clean and free from contamination.
4. Push-fit body into pipe. Use some rotational movement to right and left as pipes come together.

Installation Files:

Range	Grate	Screed Floor		Vinyl Floor		Tile Floor
Push-Fit	Round
Push-Fit	Round
Push-Fit	Square
Push-Fit	Round
Push-Fit	Round
Push-Fit	Square

Accommodating vinyl floors:

ACO Wexel push-in bodies and grate assemblies have the option to accommodate vinyl flooring by means of a clamping grate and flange. This creates a water tight seal between vinyl floor and clamp. Care must be taken when the vinyl is cut so that it can be securely clamped and not protrude into the open space beneath where it can restrict flow.